Jump to content

Exhaust Pipe Suspension AISI 316

Vibratec’s unique all-metal exhaust suspensions have been implemented in thousands of ships since the mid 1970:s.

A major reason for our success is the fact that all our products are so well adapted to their purpose; as the isolators are all metallic, they are insensitive to one of the main problems with exhaust suspensions – the heat.

The life-expectancy of Vibratec’s solution is the same as that of the exhaust system itself so it does not need to be replaced during its life span.

  • We provide complete technical proposals to our customers including:
  • Filled-in Auto-CAD drawings with proposed products and positionings
  • Reaction force and noise calculations
  • Expansion joint calculations with proposed pre-tension List of materials
  • Principal installation instructions
  • Quotation and product data sheets
Our Products!

Products

Here you can find all the products in the application area.

Category

  • Image of Vibratec Penetration Clamp BHP

    Bulkhead Penetration VT-BHP

    Vibratec provides a series of watertight bulkhead penetrations. They are delivered as complete sets, with no need for drilling or…

  • Exhaust Bellows VTAB

    Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…

  • A picture of an expand joint , also known as a bellow. THis one is a double bellow.

    Exhaust Bellows VTAD

    Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…

  • Exhaust Bellows VTAS

    Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…

  • Image of Vibratec Metal Cushion VT-HMEE-K

    Metal Cushion VT-HMEE-K

    All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…

  • Image of Vibratec Metal Cushion VT1110

    Metal Cushion VT1110, VT1130

    All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…

  • Image of Vibratec Metal Cushion VT1120-VT1140

    Metal Cushion VT1120 – VT1140

    All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…

  • Image of Vibratec Steel Mount VT3353 – VT3355

    Metal Mount VT3353 – VT3355

    Double acting all metal resilient isolator produced of AISI 316 stainless. The progressive spring rate of the cushions yields an…

  • Image of Vibratec VT-FTPC Funnel Top Penetration Clamp

    Penetration Clamp VT-FTPC

    VT-FTPC is an all metal pipe clamp with resilient elements made of stainless steel 18/8. Ring and base plate made…

  • Image of Vibratec Pipe Clamp VTPC 100

    Pipe Clamps VTPC 100-900

    A very rigid construction that allows quick mounting/dismounting of the pipes. The resilient elements are non-creeping, are unaffected by oils,…

  • Image of Vibratec Spring Isolator VT4524-0X

    Spring Isolator VT4524-0X

    Single working all metal telescopic mount. Spring made of high tensile steel. Resilient element, cushion in stainless steel wire. Scrolls…

  • Image of Vibratec Spring Isolator VT4524-2X

    Spring Isolator VT4524-2X

    Single working all metal telescopic mount. Vibration isolation of exhaust-, air- and steam-pipes. Stabilisation of frames and equipment on vessels,…

  • Image of Vibratec Spring Isolator VT4524-4X

    Spring Isolator VT4524-4X

    Single working all metal telescopic mount. Vibration isolation of exhaust-, air- and steam-pipes. Stabilisation of frames and equipment on vessels,…

  • Image of Vibratec Spring Isolator VT4570

    Spring Isolator VT4570

    All metal mounts . High tensile steel springs. Resilient cushions in 18/8 stainless steel wire. Other parts in steel. Surface…

  • Image of Vibratec Steel Mount VTCI-2000S-A4

    Steel Mount VTCI-2000S-A4

    Vibratec Cushion Isolator for use as elastic sliding support. Resilient elements and isolator structure parts are all made of AISI316…

No products found

Contact us