Ceiling System VT-MCH

The ceiling system VT-MCH is designed as an acoustic suspended ceiling to mitigate air borne noise and impact sound. The hanger can be both top- or side mounted. It is used together with Vibratec's click-on hangers and profiles or can be used as a stand-alone hanger for equipment such as speakers, pipes or ventilation.

Close-up showing a back mounted VT-MCH hanger. Battens are installed and decoupled from the walls by our elastic VT-strip.

Suspended Ceiling System VT-MCH. The mount can be fixed in two different ways; top or side mounted. This is a great feature where space is limited.

Suspended Ceiling System VT-MCH. We will help you customize the distance between hangers and rails, the suspended height according to specifications from the acoustic consultant.

Illustration of the ceiling system VT-MCH with top mounted hanger and click-on battens

Product Characteristics

An excellent feature of ceiling system VT-MCH is that the elastic hanger can be back mounted as well as top mounted. Back mounting the hanger on a floor joist will greatly reduce the building height. When a bigger air gap is needed, threaded rods can be used instead of bolts.

Using elastically suspended ceiling systems is a great way to reduce unwanted noise between floors in buildings. These elastically suspended ceilings must also be de-coupled from surrounding walls by using our self adhesive elastic strip VT-Strip and acoustic sealant VT-FAS

Screws, threaded bars, click-ons and ceiling profiles are not a part of the product but can be included if a complete ceiling system is required.

Product Applications

Paired with Vibratec’s click-on hangers and profiles:

acoustic suspension of ceilings

Without click on hangers and profiles:

hanging equipment such as speakers, pipes or ventilation.

Note (feature)
For beam structures, back mounting of the hangers could reduce the total height of the system.

Technical Specifications

Technical drawing of the ceiling system VT-MCH with top mounted hanger and click-on battens

Technical drawing showing a top mounted VT-MCH hanger. Also a part of the suspended ceiling system VT-MCH from Vibratec.

Technical drawing showing a back mounted VT-MCH hanger. A part of the suspended ceiling system VT-MCH from Vibratec.

Ceiling Hanger VT-MCH technical specificationceiling-hanger-vt-mch-technical-specification.xlsx

Sheet1

Type	Load (kg) / hanger	Fn (Hz)	Deflection (mm)
VT-MCH-400/25	10 - 20	12 - 15	2 - 3
VT-MCH-400/50	10 - 20	7 - 11	4 - 7
VT-MCH-510/25	20 - 30	12 - 15	2 - 3
VT-MCH-510/50	20 - 30	7 - 11	4 - 7
VT-MCH-570/25	30 - 40	12 - 15	2 - 3
VT-MCH-570/50	30 - 40	7 - 11	4 - 7

Downloads

Ceiling system VT-MCH installation manual – en

More Ceiling Systems from Vibratec

See our different ceiling systems and choose the right solution for you, or contact us for advice.

Related News

News archive

Construction

Vibratec delivers to Maximteatern

We are proud to be part of the resurrection of the iconic theater Maxim in Stockholm. After being closed for a few years, Maxim is now undergoing renovation and will be reborn as a flexible cultural venue, including a modern restaurant

Image of construction of Filmstaden Uppsala

Construction

Vibratec supplies soundproofing solutions to Filmstaden in Uppsala

Constructing movie theaters with cinema halls side-by-side requires efficient sound isolation, which can be a challenging task. Each cinema must be built as a “floating box,” completely separate from the structure, using a “room-in-room” or “box-in-box” solution.