Floor System VT-BAT
Product Characteristics
A floating floor system that’s easy to install and Depending on the load and the choice of height resonance frequencies below 6 Hz can be achieved. See frequency curves below.
The stiffness can be adjusted by adjusting the number of isolators per m2 and / or by choosing softer/stiffer material for the isolators. Depending on threshold values for noise damping, the weight of the floor and the load that it is exposed to, we will calculate the perfect floor tailored to your needs.
Please contact Vibratec for advice.
Product Applications
Used for wet or dry floating floors in rehearsal rooms, studios, cinemas, offices and industries. Also used in sprung floors for dance, gymnastics, sports and stages.
Install self adhesive isolation strips (VT-Strip) around the perimeter of the floating floor to de-couple the floating floor from the adjacent structure Install the VT-BAT rails with c/c- distance 600 mm. Place low density mineral wool between the VT-BAT rails (the thickness must be less than the deflected void under the floating floor).
Screw floor panels into the VT-BAT rails.
For more detailed instructions go to our installation guide
Technical Specifications
floor-system-vt-bat-technical-specifications.xlsx
Load Range
| Color | Type | Load range (kg/m2) |
| Grey | VT-BAT-400 | 40 - 120 |
| Brown | VT-BAT-510 | 60 - 240 |
| Pink | VT-BAT-570 | 80 - 310 |
| *Loads are based on cc 600 mm | ||
Deflection & Natural Frequency
| Height | Deflection | fn (Hz) |
| 25 mm | 1 - 2 mm | > 9 Hz |
| 30 mm | 2 - 3 mm | > 8 Hz |
| 50 mm | 4 - 7 mm | > 6.5 Hz |
| 75 mm | 8 - 12 mm | > 5.5 Hz |
Downloads
-
Floor system VT-BAT installation manual english
-
Golvsystem VT-BAT installationsmanual svensk
-
Test Report – Impact-sound-reduction VT-BAT floating floor
English 
Swedish 
Norwegian 
French 
Estonian 
Finnish 
Danish