Metal Isolation Mount V43 – V46

One of Vibratecs all metal mounts for vibration isolation and shock damping. Made up of a 18/8 stainless steel wire mesh resilient cushion fixed under the foot. Locating foot in cast iron, paint protection. Suffix “H” with house and levelling screw.

Product Characteristics

Mounting with a natural frequency of 15-20 Hz within a wide load range. Progressive spring-rate. Designed to absorb high static and dynamic forces for machines without base fitting.
For compression loads only.

Maximum excitation amplitude: ± 0,3 mm.
Dynamic overloading: 5 g.
Magnification factor (Q): < 4.
Temperature range: -90°C to +300°C.

V43HW-V46HW includes an upper housing, a levelling screw, locking nut and washer.

Product Applications

Vibration isolation of very disturbing machine tools or where a high degree of isolation is required: All types of presses, guillotines, bending-and rolling machines. Suspension of rotating machines operating at over 2500 rpm. Stabilisation of exhaust pipes.

Installation

Raise the machine
Place the mounts under the machine and fasten the bolts
Lower the machine until it rests on the mounts
Level the machine and lock the nuts.

Note

For less disturbing machine tools or where a very stable suspension is necessary, use machine mountings V43 – V46 or V43H – V46

For greater static loads, use multiple element packages (consult us).

Technical Specifications

metal-mount-v43w-v46w-technical-specifications.xlsx

Dimensions

Ref	ØA	B	ØD	b	C	Weight (kg)
Ref		free		free		"W"	"HW"
V43W, -HW	95	47	80	31	M16 x 400	0.4	0.9
V44W, -HW	95	47	80	31	M16 x 400	0.5	1.1
V45W, -HW	155	55	128	36	M20 x 200	1.4	2.9
V46W, -HW	190	70	170	43	M27 x 200	3.3	6.5