Regufoam Vibration Isolation

Regufoam® vibration is an elastic polyurethane foam designed for optimal vibration isolation. It is available in various thicknesses, now including thinner options, offering even more flexibility to suit diverse needs.

Variations

Product Characteristics

Continuous static load
0.85 N/mm²

Continuous and variable loads/operating load range
0 to 1.20 N/mm²

Peak loads (rare, short-term loads)
up to 7 N/mm²

Standard forms of delivery, ex warehouse

Sheets
Thickness: 12.5 and 25 mm are standard, and regularly available off the shelf. Special thicknesses on request
Length: 1500 mm, special lengths available on request
Width: 1000 mm

Strips or pads
On request: Die-cutting, water-jet cutting, self-adhesive versions possible

On request we can tailer to your needs and produce 75, 50, 37.5, 25, 12.5, 6 mm all the way down to 2 mm thicknesses.

Technical Specifications

regufoam-810-specifications.xlsx

Regufoam 810

Physical property	Norm	Result	Comment
Static modulus of elasticity	Based on EN 826	5.4 - 8.0 N/mm2	Tangential modulus, see ﬁgure “modulus of elasticity”
Dynamic modulus of elasticity	Based on DIN 53513	11.0 - 16.5 N/mm2	Depending on frequency, load and thickness, see ﬁ gure “dynamic stiffness“
Mechanical loss factor	DIN 53513	0.10	Load-, amplitude- and frequency-dependent
Compression set	Based on DIN EN ISO 1856	7.9 %	Measured 30 minutes after decompression with 50 % deformation / 23 °C after 72 hrs
Tensile strength	Based on DIN EN ISO 1798	4.6 N/mm2
Elongation at break	Based on DIN EN ISO 1798	230%
Tear resistance	Based on DIN ISO 34-1	20.0 N/mm
Fire behaviour	DIN 4102	B2
	DIN EN 13501-1	E
Sliding friction	REGUPOL-laboratory	0.6	Steel (dry)
	REGUPOL-laboratory	0.75	Concrete (dry)
Compression hardness	Based on DIN EN ISO 3386-2	1241 kPa	Compressive stress at 25 % deformation test specimen h = 25 mm
Rebound elasticity	Based on DIN EN ISO 8307	58%	dependent on thickness, test specimen h = 25 mm
Force reduction	DIN EN 14904	35%	dependent on thickness, test specimen h = 25 mm