REGUPOL Vibration Isolation

The REGUPOL vibration range offers a portfolio of eight product types which can be used in the wide load range between 0.002 N/mm² and 1.5 N/mm². This creates many possibilities to implement an isolation concept for projects in the field of building services and HVAC equipment, machines, pools and gyms, as well as vibration protection for buildings, especially those in close proximity to rail infrastructure.

Variations

Regupol Vibration 450, compared to the entire range.

Product Characteristics

REGUPOL vibration 450 is a vibration isolation and structure-borne sound de-coupling material for the load range up to 0.12 N/mm² and is used for insulating vertical structural elements.

Continuous static load
0.12 N/mm²

Peak loads (rare, short-term loads)
0.18 N/mm²

Standard forms of delivery, ex warehouse

Sheets
Thickness: 50 mm, special thickness available
Length: 1,000 mm
Width: 500 mm

Strips/Pads
On request: Die-cutting, water-jet cutting, self-adhesive versions possible

Product Applications

REGUPOL vibration 450 is used as a single layer to achieve natural frequencies down to 8 Hz, depending on load and material thickness. The material can be supplied with integrated installation aid.

Building base isolation
Rail track isolation
HVAC equipment
Machines
Pools
Gyms

Technical Specifications

REGUPOL Vibration 450 specificationsregupol-vibration-450-specifications.xlsx

REGUPOL Vibration 450

Physical property	Norm	Result	Comment
Static modulus of elasticity	Based on EN 826	0.2 - 0.4 N/mm2	Tangential modulus, see ﬁgure “modulus of elasticity”
Dynamic modulus of elasticity	Based on DIN 53513	0.45 - 2.70 N/mm2	Depending on frequency, load and thickness, see ﬁgure “dynamic stiffness“
Mechanical loss factor	DIN 53513	0.17	Load-, amplitude- and frequency-dependent
Compression set	Based on DIN EN ISO 1856	4.1 %	Measured 30 minutes after decompression with 50 % deformation / 23 °C after 72 hrs
Tensile strength	Based on DIN EN ISO 1798	0.15 N/mm2
Elongation at break	Based on DIN EN ISO 1798	40%
Tear resistance	Based on DIN ISO 34-1	1.9 N/mm
Fire behaviour	DIN 4102	B2
	DIN EN 13501-1	E
Sliding friction	REGUPOL-laboratory	0.5	Steel (dry)
	REGUPOL-laboratory	0.6	Concrete (dry)
Compression hardness	Based on DIN EN ISO 3386-2	83 kPa	Compressive stress at 25 % deformation test specimen h = 50 mm
Rebound elasticity	Based on DIN EN ISO 8307	42.7%	dependent on thickness, test specimen h = 50 mm
Force reduction	DIN EN 14904	74%	dependent on thickness, test specimen h = 50 mm
Ozone resistance	DIN EN ISO 17025	Cracking stage 0