Products
Products – by Area of Application
Go to our different Areas of Application to see what products and solutions we can offer your business
Product Filter
Here you can filter see all our products and filter them by application area and product category
Area of application
Application
Category
-
3D Isolation Washer
Regupol® 3D Isolation Washers reduce flanking noise transmitted by mechanical fasteners. The top-hat design effectively eliminates the transfer of vibration…
-
Acoustic Joint VT-FAS
Acoustic Joint VT-FAS is a high performance, professional quality, easy to use sealant and adhesive. This product outperforms conventional sanitary…
-
Acoustic Louvers
Louvers offer a good protection for air intake and exhaust openings to technical installations. The louvers are suitable for commercial…
-
All Metal Mount VTCI-1500F
Vibratec Cushion Isolator for use as elastic fix point. Resilient elements are made of 18/8 stainless steel wire mesh, center…
-
All Metal Mount VTCI-300F – VTCI-700F
All Metal Mount VTCI-300F – VTCI-700F used for suspension of machine tools in general, especially crushing machines and grinding mills.…
-
All Metal Mount VTCI-3500F
Vibratec Cushion Isolator for use as elastic fix point. Isolator with equifrequency character; 15-20 Hz for the recommended load range.…
-
Anti Vibration Pad – VT-AVP
Vibratecs Anti-Vibration Pad series is an elastomer isolator primarily used for vibration isolation of rotating machinery and other equipment. The…
-
Catalyst MINE-X DC2 – DC18
MINE-X® oxidation purifiers eliminate dangerous carbon monoxide (CO), hydrocarbons (HC), odor and particulates from diesel fueled engines. By using the…
-
Ceiling Hanger VT-ACC
The Vibratec acoustic ceiling connector VT-ACC is designed for easy installation and good performance. The connector/hanger is made of galvanized…
-
Ceiling Hanger VT-MCH
The VT-MCH Multi Cushion Hanger is designed for both top or back mounting. It could be used together with Vibratec…
-
Ceiling Hanger VT-MSH
The VT-MSH Multi Spring Hanger for suspended ceilings, designed for both top or back mounting. It could be used together…
-
Ceiling Hanger VT-RFH
The Ceiling Hanger VT-RFH is a series of ceiling hangers available in 5 different load ranges. Housing and washer in…
-
Ceiling System VT-CBC
The Vibratec VT-CBC Ceiling System is an acoustic ceiling designed and optimized for rehearsal rooms, music studios, theaters, cinemas, residential…
-
Ceiling System VT-MCH
The VT-MCH Multi Cushion Hanger is designed for both top or back mounting. It could be used together with Vibratec…
-
Ceiling System VT-MSH
The VT-MSH Spring Hanger is designed for both top or back mounting. It could be used together with Vibratec click-on…
-
Ceiling System VT-SFC
The VT-SFC Single Frame Ceiling System is designed to optimize the sound isolation of suspended ceilings. The system comprises of…
-
Ceiling Systems: Complementary Products
To compliment our ceiling systems, we have chosen a few products that are proven to work and ease installation.
-
Cylindrical Dampers
Cylindrical dampers are cost-effective and convenient items for damping vibrations from, for example, motors, generators, machinery, and other vibrating equipment.
-
Damping Glue DG-1000
The viscoelastic damping material, DG-1000, is a one component acrylic compound optimised to give a high composite damping in combination…
-
Damping Glue – DG-2000
DG-2000 is a water-based acrylic damping glue optimised for wooden based constrained layer damping applications. A one-component viscoelastic damping glue…
-
Elastic Strip VT-Strip
Vibratec VT-Strip is a self-adhesive soft elastic strip primarily used to separate vibration isolated structures from non-isolated structures.
-
Elastomer Mount DMS 077 – 158
Resilient elements in natural rubber or neoprene (NBR) in shorer hardness 40 or 60 shore. Metal parts in zinc plated…
-
Elastomer Mount DMS020
Resilient elements in natural rubber or neoprene (NBR) in shorer hardness 40, 55 or 70 shore. Metal parts in zinc…
-
Elastomer Mount HD Marine
Low frequency rubber vibration isolator designed for use under propulsion engines and other marine applications.
-
Elastomer Mount M 7 – M 1500
Low frequency rubber isolator primarily for vibration isolation of rotating machinery. The design allows for large deflection resulting in low…
-
Elastomer Mount PC 100 – 182
An elastomer mount with resilient elements in natural rubber or neoprene in shorer hardness 45, 55 alt. 65 shore. Metal…
-
Elastomer Mount PC 270
Resilient elements in natural rubber or neoprene in shorer hardness 45, 55 alt. 65 shore. Metal parts in chromated steel.…
-
Elastomer VT-AC-1005
VT-AC-1005 material is an engineered compound with Cork and Natural Rubber. This product is suitable for vibration control applications in…
-
Elastomer VT-AC-1006
VT-AC-1006 material is an engineered compound with Cork and Natural Rubber. This product is suitable for vibration control applications in…
-
Exhaust Bellows VTAB
Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…
-
Exhaust Bellows VTAD
Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…
-
Exhaust Bellows VTAS
Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…
-
Flexible Floor Bracket VT-FFB
Vibratec’s Flexible Floor Bracket is a quick and easy way to build an adjustable floating floor. The bracket fits on…
-
Floor System VT-BAT
Vibratec floor system VT-BAT is a quick and easy-to-install system with discrete isolators. The system comprises of 3 meter long…
-
Floor System VT-FLOAT
A system for heavy floating concrete floors with either elastic pads or steel springs as discrete isolators. VT-FLOAT is used…
-
Floor System VT-JFS
VT-JFS is a floating floor system from Vibratec. The anti-vibration system raises the floor slab on springs with dampen impact…
-
Floor System VT-dBlock
VT-dBlock is an adjustable system for raised floors specially developed for a quick and easy installation and for effective impact…
-
Metal Cushion VT 1405
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency within…
-
Metal Cushion VT-HMEE-K
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT1110, VT1130
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT1120 – VT1140
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT1502 – VT1504 – VT1505 – VT1506
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Isolation Mount V43 – V46
One of Vibratecs all metal mounts for vibration isolation and shock damping. Made up of a 18/8 stainless steel wire…
-
Metal Mount V 118 – MG – V 318
All-metal mounts with equifrequency characteristics for the defined load range.
-
Metal Mount VT-DZ
An all metal vibration isolator for a resilient suspension of motors, pumps, generators and exhaust pipes.
-
Metal Mount VT-DZ-S
An all metal vibration isolator for a resilient suspension of motors, pumps, generators and exhaust pipes
-
Metal Mount VT3353 – VT3355
Double acting all metal resilient isolator produced of AISI 316 stainless. The progressive spring rate of the cushions yields an…
-
Metal Pendulum Mount VT281P – VT283P
Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.
-
Metal Pendulum Mount VT345P
Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.
-
Metal Pendulum Mount VTCI-300F-P – VTCI-700F-P
Double acting all metal pendulum mount for isolation against vibrations and shock of exhaust-, air- and steam-pipes. Stabilisation of frames…
-
Noise Enclosure
Sound insulating enclosures reduce the transfer of noise between the source and the recipient.
-
Penetration Clamp VT-BHP
Vibratec provides a series of watertight bulkhead penetrations. They are delivered as complete sets, with no need for drilling or…
-
Penetration Clamp VT-FTPC
VT-FTPC is an all metal pipe clamp with resilient elements made of stainless steel 18/8. Ring and base plate made…
-
Pipe Clamps VTPC 100-900
A very rigid construction that allows quick mounting/dismounting of the pipes. The resilient elements are non-creeping, are unaffected by oils,…
-
Regufoam Vibration Isolation
Regufoam® vibration is an elastic polyurethane foam designed for optimal vibration isolation. It is available in various thicknesses, now including…
-
Regufoam WC Strip
The 2 mm REGUFOAM® WC Strip effectively dampens disturbing impact sounds during flushing and use, especially floor-standing toilets.
-
Regupol Sound & Drain 22
Elastic Materials / Underscreed Mats The 15 mm thick impact sound insulation REGUPOL sound and drain 22 has a profiled…
-
Regupol Vibration Isolation
The building authority approved REGUPOL vibration range offers a portfolio of eight product types which can be used in the…
-
Sandwich Layer CLD14 – CLD21
CLD 14 concists of a bitumen mat with self adhesive and paper release on both sides. Comes in 2 thicknesses;…
-
Shock Absorber VT-XM
Steel mounting with excellent shock absorption capacity, highly resistant to fatigue. It is made of a stainless steel and an…
-
Silencer ADS25 – FP-Series
A silencer plays a crucial role in reducing noise produced by exhaust systems in marine, industrial, and offshore applications. By…
-
Silencers DSA/FPR – DDA/FPD
Recommended for silencing the exhausts of small and medium sized diesel and petrol engines. The DSA/FPR have twin chambers and…
-
Sound Absorber Reapor®
Reapor® is an eco-friendly sound absorber for challenging environments. The panels are hard, lightweight and fibre-free and can be used…
-
Spring Hanger VE-101
Housing in zinc-plated steel, spring in high tensile stainless steel. Guiding bracket in neoprene. Zinc-plated fastening details.
-
Spring Hanger VT-4523
Single working all metal telescopic mount with spring made of high tensile steel. Scroll in aluminum and housing in zinc…
-
Spring Isolator 7002
Light weight isolator mount. Made with resilient elements: steel spring, cushions and bore made of 18/8 stainless steel. Housing and…
-
Spring Isolator VT-7001
All metal isolator. Resilient elements: steel spring, cushions and bore made of 18/8 stainless steel. Housing and flange in aluminium.…
-
Spring Isolator VT4090
A very soft isolator with integrated adjustable snubbing. Designed especially for suspension of mobile equipment. Vibration isolation and suspension of…
-
Spring Isolator VT41XX
A very soft spring isolator with integrated adjustable snubbing, shock damping. Designed especially for suspension of mobile equipment for example…
-
Spring Isolator VT42XX
A very soft spring isolator with integrated adjustable snubbing, shock damping. Designed especially for suspension of mobile equipment for example…
-
Spring Isolator VT4414 – VT4424
All metal isolators. Spring in high tensile steel, resilient cushion of 18/8 stainless steel wire mesh
-
Spring Isolator VT4421
All metal isolators. Spring in high tensile steel, resilient cushion made of 18/8 stainless steel wire mesh.
-
Spring Isolator VT44XX-DM
Springs with high-class anti-corrosion protection for use in harsh environment, outdoors in marine and offshore applications.
-
Spring Isolator VT4524-0X
Single working all metal telescopic mount. Spring made of high tensile steel. Resilient element, cushion in stainless steel wire. Scrolls…
-
Spring Isolator VT4524-2X
Single working all metal telescopic mount. Vibration isolation of exhaust-, air- and steam-pipes. Stabilisation of frames and equipment on vessels,…
-
Spring Isolator VT4524-4X
Single working all metal telescopic mount. Vibration isolation of exhaust-, air- and steam-pipes. Stabilisation of frames and equipment on vessels,…
-
Spring Isolator VT4570
All metal mounts . High tensile steel springs. Resilient cushions in 18/8 stainless steel wire. Other parts in steel. Surface…
-
Spring Isolators V303 – V308
Isolation of exhaust systems, especially on ships. Isolation of various pipes (pressurised air or fluids). Protection of fragile equipment during…
-
Spring Isolators V403 – V406
All metal isolator of the double-action type, designed for loading in tension and compression. Isolation of exhaust systems, especially on…
-
Spring Isolators VT4412 and VT4422
This is a metal isolator made with a spring in high tensile steel, resilient cushion of 18/8 stainless steel wire…
-
Spring Isolators VT4413 and VT4423
This is a metal isolator made with a spring in high tensile steel, resilient cushion of 18/8 stainless steel wire…
-
Spring Package AVM
Our custom made spring vibration isolators are designed for outdoor offshore and marine installations. The steel structure is often manufactured…
-
Spring Package VT4625-B
Pre-Compressed Spring Boxes primarily used for vibration isolation of heavy machine foundation and buildings. The VT4625-serie is used where the…
-
Spring Package VT4660-B
Pre-Compressed Spring Boxes primarily used for vibration isolation of heavy machine foundation and buildings. The VT4660-serie is used where the…
-
Spring Packages 1, 2 or 3 rows
Springs in high tensile steel, resilient cushions of 18/8 stainless steel wire mesh, schrolls in aluminium, mounting plates in painted…
-
Steel Mount AVM
The custom made cushion vibration isolators are designed for outdoor offshore and marine installations. The cushion vibration isolators are typically…
-
Steel Mount VTCI-2000S-A4
Vibratec Cushion Isolator for use as elastic sliding support. Resilient elements and isolator structure parts are all made of AISI316…
-
Track System VT-GSF
The VT-GSF solution consists of elastic profiles that completely encapsulate the rail and provide a continuous support without rail fasteners.…
-
Track System VT-MODULIX
The VT-MODULIX solution consists of pre-fabricated concrete slabs containing the rail, road finish, drainage etc. The rails are completely embedded…
-
Track System VT-STERO
The VT-STERO solution consists of pre-fabricated reinforced concrete beams containing the rail which is completely embedded in elastic material. The…
-
Tuned Mass Damper – High Frequency
A high frequency TMD is a additional damping device which is used in various mechanical applications. A High frequency TMD…
-
Tuned Mass Damper – Low Frequency
A tuned mass damper is a device used primarily in engineering and architecture to reduce the effects of structural vibrations…
-
Wall Mount VT-AWS
VT-AWS (Acoustic Wall Suspension) is used to de-couple inner walls to prevent transmission of vibrations and structure born sound.
-
Wall Mount VT-AWS-L
VT-AWS-L (Acoustic Wall Suspension) is used to de-couple inner walls to prevent transmission of vibrations and structure born sound.
-
Wall Mount VT-WH
Wall mount VT-WH (Wall Hanger) is used to de-couple inner walls to prevent transmission of vibrations and structure born sound.
-
Wire Rope Isolators – WRI-AXX
Wire rope isolators are typically used in aerospace, defense, industrial, and marine applications to reduce the transmission of vibration and…
Interested in our products but need assistance?
Feel free to contact us for more information
- Construction
Creating Optimal Acoustic Environments: Vibratec’s “Room” Solutions
In the ever-changing world of the music industry, the demand for high-quality recording spaces has never been greater. With platforms like Spotify reshaping how we listen to music, ensuring outstanding audio quality has become critical for both artists and producers. But achieving this level of quality requires more than just modern equipment – it demands…
- Construction
Case Study: Tuned Mass Dampers for Pedestrian Bridge in Malmö
During the structural design of the pedestrian bridge at Bagers Plats in Malmö, it became obvious that it would require a TMD, as the lowest vertical was calculated to 1.85 Hz.Vibratec designed a TMD solution: in total 2 TMD’s with a vibration mass of each 340 kg was installed in the mid section of the…